Cube Piggy Bank

Unlock the cuteness and savings with our Piggy Cube Bank! This delightful money keeper combines charm with functionality – a whimsical pig face design, hassle-free coin and bill insertion, and a smart plugable hole for easy withdrawals. Start a stylish savings journey today and turn every penny into a precious memory. 

This model was inspired by a model from quentenking@sketchfab, but completely redone in Fusion 360.

Printing

• Models should be printed in their original orientation.
• Support is recommended for
  •  underside of face (where snot and eyes are), unnecessary if your printer is good with bridging
  • underside of body (where the plug will be placed).
• Printing with PETG is recommended, because there is a snap fit part on the face part. And also because I didn't test with PLA - it will probably work anyway. Please let me know if you have success with PLA.
• Eyes are optional, you can also paint the holes with a black marker

Assembly

• The face should snap onto the body, but I recommend also gluing it.
• The plug on the backside of the body fits quite tightly, I recommend using a screwdriver or tip of a knife to turn it into place.
• The snot should snap into place.

Customization

There is a blank face model, which would allow for easy customization/remixing.

Fake testimonials

• “Move over Warren Buffett, Piggy Cube Bank is the real money maestro. The eyes have it, and the nose knows it all.” - Swine McFortune, Financial Guru Piglet
• “Ever since I met Piggy Cube Bank, my savings have skyrocketed! It's like magic, but with more oinks.” - Daisy Pennypincher, Thrifty Enthusiast
• "I used to be allergic to savings until I met Piggy Cube Bank. Now, I'm sneezing my way to financial success – thanks to the cutest cure for broke-itis!" - Chuckles McSaver, Money Magician