TJ's Filament Passthrough for the Prusa Enclosure
A filament passthrough for the top middle opening of the Prusa Enclosure with or without PC4-M10
1
21
0
106
updated November 17, 2023
Description
PDFA filament passthrough for the top middle opening of the Prusa Enclosure with or without PC4-M10. A PTFE hose (2.5 mm x 4 mm) is recommended.
Two M3 nuts and M3x10 or M3x12 screws are needed.
Hand screws to close the M10 openings are also provided.
No supports are needed. The Passthrough top modell brings its own supports with the .STL file.
Tags
Model origin
The author marked this model as their own original creation.
