AnkerMake M5c Safe Zones

The AnkerMake M5c shares the same design flaw with the M5.

THE PROBLEM: The screen and filament pods on each side of the printer overlap the base of the printer. If the gantry is up, you might put something in that space, and when you start a print, the printer will return to home and crush whatever was put in that space. This will cause a printer error, possibly even breakage.

THE SOLUTION: Print these small "save zones" and clip them around the gantry legs. They serve as a physical and visual reminder not to place anything in that area. It's an active work zone!

I got the Idea for those save zones from Pluggy.

There are two .stl files. One is a simple Clip that covers all dangerous areas.

The other file can be used together with the Accessory Bins for M5C designed by PaulFirschin_1114995 https://www.printables.com/de/model/571998-accessory-bins-for-ankermake-m5c

You can print the same file for both sides of the Printer.

Print Settings

Printer Brand:

AnkerMake

Printer: 

AnkerMake M5

Rafts:

No

Supports: 

No

Infill:

25

Filament:

Azure Film PETG Green Transparent

Category: 3D Printer Accessories

Changed to fit Ankermake M5c