Raspberry Pi 4b case with internal 30mm fan. With wall or stand mount.

NEW 6th April '22 - v1.2

• Corrected hole distances
• Added tapered bolt holes
• Strengthening
• Minor tidy ups
• Better fitting with stand and case lid
• Improved text readability
• Widened side vent so a ribbon cable can pass through without obstruction
  (requires cutting away of vent uprights)

NEW 26 July '19

• Now with stylish stand / cable tidy!
• v1.1b case bottom with larger micro HDMI ports

Features:

• Active cooling with a 30 x 30 x 7 mm fan (max 10mm fan)
• Well ventilated
• No glue or screws - slide or bolt together
• Wall / project mount plate with quick slide removal
• 2 part case, 1 part wall mount, 1 double stand (back and front mount)
• Holes for GPIO port, display, LEDs etc..
• Easy removal of Micro SD card
• Ports labelled
• Easy to fit, quick to print, cheap to make
• Cool Logos!

Note: Just made a few minor tweaks including stop for bottom plate and slight adjustment for USB connectors (v1.1)

Fan is 30 x 30 x 7mm ... currently from
https://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=30+x+30+x7+fan&_blrs=spell_check

or from Amazon ...

https://www.amazon.co.uk/s?k=30+x+30+x+7+fan&crid=3ETO4S5D25JMA&sprefix=30+x+30+x+7+fan%2Caps%2C78&ref=nb_sb_noss

Print Settings

• Printer:

JG Aurora A5

• Rafts:           No
• Supports:    No
• Resolution:  0.2 mm
• Infill:            15%

Supports have been added so you don't need to

For extra strong body, use 5 layers top and bottom. 3 layers for perimeters.

Printed my case at 4800 mm/min although this will vary depending on your printer

Successfully printed on MK4 with 5.1.0 Alpha 2 input shaping speed setting.