Satsana 5015 Ender 3 V2 for Phaetus BMS Hotend or similiar

I remixed Satsanas Ender 3 fanduct with an 5015 blower fan to fit the Ender 3 V2 X-Axis gantry and my Phaetus BMS Hotend because it is wider (24mm) than the standard Ender 3 V2 hotend. Now the space between the walls where the hotend sits is 26mm. Now the hotend has enough room to fit this fanduct.

To mount it, i used one existing hole from original Satsana duct. I changed the other hole, to fit the Ender 3 V2 X gantry. You habe to use an M3 screw from behind and a M3 nut placed on the front in the groove.

This is my second version, because the first didnt had the groove for the M3 nut.

Please confirm if everything fits. Im currently printing with my first version, but when i find the time, im going to print this version.

I gave the 5015 blower just a 0.1mm more space, because i had to cut a little bit to fit my Sunon 5015 blower fan. Now it should fit right in its place. (Verification needed)

This is my first remix, so please comment, if something doesnt fit. I will look into it.

Happy printing.

Pictures will follow.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

40

Filament: 3D Jake PLA Black

Notes:

I printed it using the standard brim setting from Cura.
If you are using a silicon sock, printing this in PLA should be fine, i had no problems with PLA fanducts.

Made some changes to make it fit an Ender 3V2 with a Phaetus Dragonfly BMS hotend.