Door Hanging Prop

I was inspired by the drill contest to create a doorknob jig, found here: https://www.printables.com/model/647394-doorknob-drill-guide

I wanted to further expand upon what I had and look to how I could also improve my door hanging experience next go around, so I decided to create this with that inspiration.

It is a stand you can use to prop a door while installing hinges or hanging. the base lift is 3mm or right around 1/8" and you can shim inside the prop itself to boost the door up more as needed.

I personally have tested only hollow doors with it, but feel it should be able to, at minimum with help from a second prop hold a solid door. If anyone tests it with a solid wood door, please let me know how that goes.

I printed this in PLA+, 3 walls and 30% cubic infill.