Motorcycle Guards

This is a simple design I create for myself and wanted to share.

Guards (Golf ball shaped) for the bars of your motorcycle to protect from scratches. 

===================================================

Size:

Sphere diameter = 60mm

Inner hole diameter = 22mm (can make more if you like)

===================================================

Recommended settings:

Infill: 25%+
Filament : PETG or Stronger
**TPU Should work fine too**

===================================================

Extra part you will need:

2 x (M4x30) Screws and their Nuts ( 7mm height & 3.2 width aprox.) 

===================================================

Instructions :

Slide the nuts into the side holes of Part 2 and align them with the screw

Screw and you're ready :P