Have you ever wondered where to put your facemask when you're not wearing it? This is a simple and functional solution
5h 7m
1× print file
0.20 mm
0.40 mm
66.00 g
29
188
2
892
updated April 26, 2021

Description

PDF

Facemask case

Print-in-place double hinges facemask case, no assembly required! Perfectly fits almost every type of facemask. Tested with surgical face masks, FFP3-FFP2-FFP1 facemasks without valves. The closure is ensured by a snap-fit joint. If printed in PETG it can be easily disinfected with alcohol. (I think Alcohol can also be used on PLA without damaging it, but I've never tried)

If you like this design, please consider buying me a coffee to support me in the creation of many other useful designs as a sign of gratitude for the huge amount of time and effort. Thank you very much and happy printing!

Print instructions

  • Orientation: the model is already in the best orientation.
  • Layer height: 0.20 mm (reccommended) or lower.
  • Supports: There are two versions available, with and without cross-shaped supports. It's convenient to print the version with cross-shaped supports in case you want to print it in different colors, so you can print the facemask and supports in color 1 and re-use these supports to fill the cross-shaped slots of the second colored facemask case :)
  • Material: PETG (recommended); PLA.

Tags



Model origin

The author hasn't provided the model origin yet.

License