Cleveland Browns Dawg Pound plaque designed to fit on a 220 x 200mm bed (Ender 3). The “trinkets” are designed to be printed in the correct color and then inserted into the base.
I HIGHLY recommend you print the “Fit Test” base and trinket before printing the main base. If the trinket doesn't fit into the base, adjust the “Hole Horizontal Expansion” setting in Cura (or comparable setting in your preferred slicer) when printing the base.
On my printer (not very tuned), I set “Horizontal Hole Expansion” to 0.2mm when printing the base to allow the trinkets to fit properly. Several of the smaller white and orange trinkets required a bit of sanding for a good fit.
3/15/24 - Fixed issue with base that was preventing the mounting hole from printing.
The author marked this model as their own original creation.