BaMaKey TP-iii / TP-3 paddle holder - BaMaTech - Mk2

A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There is a cutout on the other end to push the central piece out. 

6 DEC 2024 Updates made to model..

• Added a little space around the key so it is not such a tight fit
• added a cutout underneath to push the key out easily with index finger
• changed the dimensions of the inner and outer such that it closes more snugly and will not unintentionally come open in your backpack etc. 
  • you need to squeeze the sides a little to get it to open
  • you might like to file down a bit from the notch if it is too tight for your liking. 
• Recessed the brand on top
• has a little indicator triangle on the end to orient with. 
• there was some discussion that the dimensions of the key had changed over time - I have confirmed with BaMaKey that the dimensions have never changed since the first one. 

Printed using ;

• PETG
• No supports required
• Default settings on Bambu X1C