Rugged Quarter Inch 1/4" & 1/2" Router Bit Box Holder

Keep those expensive router bits safe, secure & dry! 

Fits ¼" bits, can take 25mm long Template & Trim bits with ease! 

Even the shortest bits do not fall out if the box turned upside-down when closed, add some thin foam in the lid to secure more if needed or you want silent transport.

Print 0.20-0.28mm layer height on 0.4-0.6 nozzle, you might find if you print on a large layer height & with a 0.6 nozzle you might need to quickly run a 6.5mm drill bit down the holes to reel them out for an easy fit.

Print in what you like, I recommend PETG for the clips as it'll flex a bit more than PLA or ASA.

You'll need x6 20mm M3 bolts.

Added router bit holder & lid text