Blade Bank (Razor Disposal Box)

A simple box with plenty of storage for used single- or double-edge razor blades.

Instructions

Print the One piece as is with 0.15mm layer height for smooth curves. No supports needed. The object includes support structures to reduce bridge lengths near the top surface. Nonetheless, please expect minor imperfections at the slot due to bridging.

For a perfect top surface finish and a colourful twist, print the Two pieces version:

1. Body: standing as is, 0.15mm layer height
2. Top plate: upside down, 0.2mm layer height

Pressfit the top plate onto the body. Optionally apply glue.

Sizes

• Slot: 25mm × 1mm
• Height: 56mm (outer)
• Diameter: 80mm (outer)
• Wall width: 1.5mm