I couldn't find an adapter for this specific mirror, so I made one. The feet are separate so that there are no supports needed. I printed with 30% infill and it seems strong enough. I printed it with pla on an Ender 3 but I would recommend using petg if it is going to be left in a hot vehicle. I had to drill out the holes but that may or may not be an issue depending on your printer and the clearances. I used threaded inserts for the middle holes. I attached all the files and can take suggestions to make it better. Please post any makes and any issues that you might have. Remixes are encouraged.
The author marked this model as their own original creation.