Sovol SV06 4020 Blower Extruder Fan Adapter - M3 Nut Variant

Supports needed. Paint on supports recommended.

Print with flat surface on bed.

I recommend full solid for more thermal resistance but It Not making a big difference.

Press the nuts into the hex-holes with a pin or pliers. Dont use a hammer! Since the material is thin it tends to break when using a hammer. They should slide in when pressed with moderate force while using a appropriate tool.

Update:

Added V2 with better stability, more clearance and better a fit on fan. Tested and reliable.

Over all same parameters as the original.

I added three hexagonal holes so M3 nuts can be added. I experienced worn out threads after turned the screws two or three times. Everything is thight and firm now.

Long time period test's are pending yet. I recommend to use thermal resistent material at least 70°C. PETG should be fine.

Feedback Welcome since I its my first Remix.