64 slot Gearhart CSM cylinder
Description
PDFCustomized version of https://www.thingiverse.com/thing:3553275
Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3553275
Printed in PLA Pro on Ender 3 Pro
No brim, support on build plate only (so only under the cylinder brim at the bottom)
My slots and cylinder spring channel came out very clean - I just ran an emery board down each slot for insurance. Probably didn't even need that.
Changed the cylinder diameter value from 123 to 122.5 for a better fit in the cam shell.
Instructions
Using the following options:
cylinder_slots = 64
slot_width = 1.5
ribber_slots = 60
cylinder_diameter = 122.5
cylinder_height = 83
wall_thickness = 3
tooth_thickness = 5
normTooth_width_at_top = 2.2
spring_slot_width = 3.1
hook_drop_depth = 14
spring_slot_height = 20
Category: Parts
Tags
Model origin
The author remixed this model. Imported from Thingiverse.
Differences of the remix compared to the original
Used the customizer to change the number of slots on the cylinder and the diameter of the cylinder.
