Che Guevara 2 - Hueforge

Please share your prints

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Dark Blue 
PLA PolyLite Red Transmission 
PLA PolyLite Starlight Neptune (Light Blue)
PLA BambuLab Matte Lemon Yellow 

Swap Instructions:
Start with Dark Blue
At layer #6 (0.56mm) swap to Red
At layer #10 (0.88mm) swap to Starlight Neptune (Light Blue)
At layer #15 (1.28mm) swap to Lemon Yellow for the rest.