Infill Samples with Display Case

14 Infill Samples with a case.  

Everything can be printed on a Prusa MINI.  Simply download the 3MF file to PrusaSlicer and change the printer type.  I had great success printing them in batches of 2 at a time (split left and right) and I haven't heard any complaints from people printing them 4 at a time.  I found that when I printed them 1 at a time, they warped.  It comes down to how you want to schedule the color changes.

Speaking of color changes, there are two, start with the back border color (sample: Galaxy Black), then switch to the infill and text color you want (sample: Viva La Bronze), then finish with the same border color (sample: Galaxy Black) you started with.  

My wife commented on my early samples that changing the front border color to a 3rd odd color takes some spotlight off the infill, and highlights the front border color more ...  but you do you and please share the results ;)

There are 5 plates to print in total.  The first 4 plates contain the infill chips and Plate 5 is the case.  No color changes on Plate 5.  If you are interested in bedazzling the case a bit, I will post a User Print of the honeycomb studs and the front bar seen in a couple pictures.

If I were you, I'd print a couple 50% samples just to try out prospective colors. Before you invest a bunch of time printing a full plate, then not liking the colors you picked, it would be wise to test your options.