IKEA KAITUM Stand with trays

A simle design to raise the KAITUM mirror to a more comfortable height, as well as containing the necessary items underneath. Can be stored away while charing as there is a slit for the cable to sit. 

I printed the stand with the front face down, and added supports towards the back-end of the top of the stand, as it's easier to support the ends near the slit. 

I had some issues with warping both on the trays and the base itself, so a 2-4mm brim depending on the material would help. Even with a brim, it warped up as the build height increased. Printing at a slightly warmed bed would maybe help as well as turning the fans down until you need it for the overhangs. Feel free to improve on this, as I tried to make is as simple as possible.