Shapeheart base riser for O2Feel Peps N3 2016

The O2Feel Peps N3 2016 folding bike as a very loaded handlebar, with tiny space for a large smartphone to be attached atop a Shapeheart magnetic base (elastic band).
I decided to remedy this issue by creating a fitting riser which will bring the magnetic base closer to the center of the handlebar, while rising it up for the smartphone to clear the screen, the handlebar quick release and the bell.

This riser is designed to be attached to the bike using a single small zip tie (less than 1.5mm in thickness and 3.5 mm in width). The Shapeheart magnetic base can also be attached using small/medium sized zip ties, as seen in the photos. I haven't tried to use the provided elastic bands as they don't fill me with confidence ^^'

Print recommendations:

• PETG or ASA for strong weatherproofing and UV resistance (prefer black for PETG)
• 3 walls, 10-15% infill
• No support needed