TFT50 Center Mount

Front mount for Big Tree Tech's TFT50 V3.0 screen.

I made this for my Adimlab Gantry Pro printers, and has clearance for the Y-Axis tensioner, but will work on most printers with a similar frame, especially with a 2020 extrusion.

Print face down, and use supports for the mounting ears.

I adjusted the SD card slot, made the stand off to mount the screen a little taller, since I found the screen would be too tight against the face, with the original model, filled in some holes on the side and combined the mounting feet from another model (https://www.thingiverse.com/thing:3628886), which were also stretched a bit to create the front mount for the Big Tree Tech TFT50 V3.0 screen.