Analogue Pocket Dock Wall Mount

This allows you to wall mount the official dock for your Analogue Pocket.
6
29
0
309
updated November 13, 2023

Description

PDF

This allows you to wall mount the official dock for your Analogue Pocket. 

There are five variations depending on how you plan to run your cables:

  1. All Openings. If you are unsure or plan on moving it in the future, this option will work for all directions.
  2. Left Opening. When looking at the print mounted on the wall, the cables exit to the left.
  3. Right Opening. When looking at the print mounted on the wall, the cables exit to the right.
  4. Bottom Opening. When looking at the print mounted on the wall, the cables exit to the bottom.
  5. No Opening. No cable hole in the print. This could be useful for running your cables upward, or in the unlikely event you don't plan on running cables (display only?).

I mounted it with two #6 1-3/8" screws (along with compatible generic drywall anchors).

No support or brim needed!

Tags



Model origin

The author marked this model as their own original creation.

License