Curvy LED Remote holder

Someone asked me to print a LED-Remote Holder, the designs I found were "too simple" for me, so I created this "curvy" one with flextures.

Printed the one in the pictures in white PET-G.

You can use doublesided adhesive or two 3mm countersunk screws to fix it.

IMPORTANT NOTE!
This model was designed for a remote 85x40x7mm, please keep these numbers in mind and scale the model accordingly in your slicer. 
Found the flexture-arms need a lillypad support for better adhesion.
The model isn't easy to support, I chose to use mesh-supports with rectangular overlapping pattern for stabilty. 
Supports were hard to remove, so may use a dissimilar material for the support-interfacelayer.