Christmas Paper Roll Cutter with Blade recess

This was a great upload but I found that the blade would not sit flush with the plastic. Added a 1mm blade notch and STP
97
527
13
3275
updated November 26, 2024

Description

PDF

Wrapping paper roll paper

CAD drawings available on ONSHAPE

 

https://cad.onshape.com/documents/d699f4cc1cbd40c079fefa78/w/94a0a86b2106c6660435546a/e/1ad62e77c24517be7092ce33

Before you commit to printing the whole model. It is recommended that you print the much smaller Print_first_to_test_blade_fitment.stl first in order to ensure that you have the correct settings in your slicer. This will also give you practice installing the blade. A correctly printed object should have tight blade fit and it should a struggle to install. If it is too loose it could be a danger to the user. As always, use common sense when installing the blade. A small pair of needled nose pliers is recommended.

Tags



Model origin

The author remixed this model.

Christmas Paper Roll Cutter (VERSION 2)
by dangles
Original model was switched to draft or deleted

Differences of the remix compared to the original

In the original design the blade would not sit flush thus allowing the paper to get caught underneath the blade. This version was modified to include a 1mm depth cut to accept a recessed #11 Blade. Apparently the original was removed. 

License