Pursa Bear MK3S Hotend Fan Vent

Make sure the airflow from the hotend fan is blowing upwards, and DO NOT COOLING THE PRINTING PARTS.

140

updated November 12, 2023

Description

This is a Hotend Fan Vent, I made this fan vent for Pursa Bear, should also work on MK3S.

The screw clamps is extremely tight, so installing this part is not very easy.

Thickness of this part is 2.5 mm, you can easily change the thickness in PrusaSlicer.

Printer: Prusa Bear (I3 MK3S)

Rafts: No

Supports: No

Resolution: 0.3

Infill: 15%

Filament: PETG

The author marked this model as their own original creation.