Prusacaster/Harley Benton T-Style Wallmount

Wanted a simple wall holder that would fit perfectly the guitar, it follows perfectly the shape of the head distributing the load evenly and reducing even further the possibility of dents, it leaves a confrontable tolerance for the neck, this way removing or inserting the guitar is easy. 

This design should be printed with more walls for extra strength and can take wall screws up to 5mm diameter with the head up to 10mm.

Print Settings:

• PLA but PETG recommended;
• 0,4 nozzle or bigger;
• 0,2 layer height or more for extra strength;
• Default settings with exception of external perimeter that should be set to 6 or 8; 
• No supports (as usual :D);