Designed in Fusion 360 from inspiration from Makers Muse video.
The picture shows it scaled up to 200%. For scale, the bed is 400x400.
If you print this at normal scale, you may need to use a brim.
Printed on the #Borg (CR-10s4 on steroids)
Sliced in Prusa Slicer at 0.48mm layer height
Parts glued together with CA adhesive (super glue)
If you print it, I'd really appreciate it if you would post your make.
Update: As requested I have added Top and Bottom halves separately so you can scale up to your max build volume.
Unassociated tags: Anti Oloid
Printer Brand: Creality
Printer: CR-10S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.48
Infill: 5%
Filament: Eolas PLA Beige
The author marked this model as their own original creation. Imported from Thingiverse.