Modular Table Building Lack System (MTBLS)

MTBLS or the Modular Table Building Lack System is an improvement on other brackets and adapters for Ikea Lack assembly.
5
15
0
162
updated November 11, 2023

Description

PDF

MTBLS or the Modular Table Building Lack System is an improvement on other brackets and adapters for Ikea Lack stiffening and building. They can print twice as fast, use less than 1/2 the fasteners of other designs, offer more assembly possibilities, are near solid where it matters with appropriate nozzles and wall counts, and the screw holes make alignment with the strongest parts of the Lack tables and Lagkapten tabletops easy. Ikea butcher block tops could also be affixed.

Use this system to build economical custom furniture and storage solutions like:
Modular gaming tables
Craft tables/stations
Coffee tables
Storage shelves for large bins
Display shelves
Kitchen islands
Standing Desks

Included in this system is:
-A corner brace/stacking connector "LackLegCorner"
-A coupling connector, stiffen or stack two lack tables side-by-side "LackLegCoupler"
-A corner connector for attaching a tabletop to Lack tables "TopCorner"
-Docking connectors, which reinforce tabletop connections and provide an alignment guide so tables can be butted up together and not come out of alignment "DockingConnectorM/F"
-A wrench for assembling Lack table legs

1 1/4" coarse threaded "bugle head" deck screws recommended for assembly.

Designed to be printed flat on the bed with no supports in PETG or ABS, but PLA can work. Cura 3MF project files to make printing easier in 3 prints if you have a 300x300mm bed. A brim may be helpful in some printing conditions.

Tags



Model origin

The author marked this model as their own original creation.

License