Selfie stick upgrade for Radiacode 102/101 "joint"

Intermediate joint for changing the angle of the RC102 holder. Mezikus - kloub pro změnu úhlu držáku RC102.
2h 51m
1× print file
0.30 mm
0.40 mm
17.00 g
2
40
0
392
updated November 11, 2023

Description

PDF

Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount.
https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2

Installation: if I already have version 2 printed and glued together. I use a knife and hammer to separate the glued threaded part from the mount. I remove the tripod thread. I screw the thread into the new joint. Using a rivet nut and bolt, I connect the joint. I glue the whole thing back together with the original bracket. 

Print standing up. For higher strength, select in the setup, a larger number of perimeters (walls). 
________________________________________________

Upgrade selfi tyče v2 pro Radiacode102/101. Tento mezikus - kloub umožní plynulou změnu držáku RC102.

https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2

Montáž: pokud již mám vytištěnou a slepenou verzi 2. Nožem a kladívkem oddělím od držáku nalepený díl se závitem. Demontuji stativový závit. Závit našroubuji do nového kloubu. Pomocí nýtovací matice a šroubu spojím kloub. To celé opět slepím s původním držákem. 

Tisknout na stojato. Pro vyšší pevnost, zvolit v nastavení, větší počet perimetrů (stěn). 

Tags



Model origin

The author marked this model as their own original creation.

License