GRIDFINITY Forstner Drill Holder 35 mm

Introduction

Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop.

This is a remix of the original bins by Zack Freedman that you can find here https://bit.ly/ZFGridfinityDividerBins or here https://gridfinity.xyz/

The dimensions of the bins are exactly the same as the original bins, so you have full compatibility to the gridfinity system.

The hole for the Drill-Bit is 0.3mm bigger - so in this case 35.3 mm. It's easier to remove and to put in the Driller into the Bin.

So feel free to test, to print, to modify and to share.

Print instructions

I printed all in (Prusament) PLA using a 0.8mm nozzle and 2 walls. PLA will be strong enough for this bin. Infill can be lowered to 10%.

You can increase the wall thickness if you want, in exchange of more material usage and slightly longer print time. 

Other Forstner Drill Holder Bins

These are my GRIDFINITY Forstner Drill Holder Bins

• GRIDFINITY Forstner Drill Holder Bin 15 mm
• GRIDFINITY Forstner Drill Holder Bin 19 mm
• GRIDFINITY Forstner Drill Holder Bin 20 mm
• GRIDFINITY Forstner Drill Holder Bin 22 mm
• GRIDFINITY Forstner Drill Holder Bin 23 mm
• GRIDFINITY Forstner Drill Holder Bin 25 mm
• GRIDFINITY Forstner Drill Holder Bin 26 mm
• GRIDFINITY Forstner Drill Holder Bin 30 mm
• GRIDFINITY Forstner Drill Holder Bin 32 mm
• GRIDFINITY Forstner Drill Holder Bin 35 mm
• GRIDFINITY Forstner Drill Holder Bin 38 mm
• GRIDFINITY Forstner Drill Holder Bin 40 mm
• GRIDFINITY Forstner Drill Holder Bin 50 mm
• … Comming soon