Danke
Print in place checklist / to-do board - Insert your paper and close!
A checklist / to-do board that has print in place sliders and cover with hinges for paper to be inserted.
1,036
1855
41
12 k
updated November 17, 2024
Makes
Comments
I had to print it 3 times to make it work as the sliding part was too close to the rest. I had to add an offset to take into account the expansion of the filament. But when it got printed it worked great.
Printed perfectly. Great print! The magnets fit perfectly. Works as intended. Thanks
If you wanted feedback, I’d say an option to put a name permanently at the top would be cool (printed or even just recessed in line with the “x” and check). Another option could be to have a 3 step check list. So it’d be a not started, in progress, and completed/checked. This could be a dash between the x and check for simplicity. Lastly, the sliders are maybe too free if that makes sense. This is for my kid and if there was a slight catch when you move it to one side that would prevent that. Anyway you have a life and this is not important. There are times I’d like this feedback and times I’m burnt out on a project and never want to think about it again. Hope you have a great day and know I wish I had your talent.
I was trying to make a paper template so I could write out the list first and then cut it to fit the pocket. The openings aren't all the same size. The first 9 out of the 10 are 14mm high but the bottom one is 12mm so my paper template isn't symmetrical. It would be nice to have the boxes all the same size.
@eli_667847 Thanks for noticing, I've had few versions uploaded since the beginning and I think I missed the sizes of the cutouts when making the cage thicker. I'll see if I can fix soon!
If only the switches would stick, this would be the perfect design. Unfortunately I was trying to use it to manage my kids and with them sliding all around for my case it makes it too cumbersome to use. Looks great though!
Looks Nice and Printed perfectly. Het to test of it works for us. But I’m afraid to brake the “door” of the cage as it’s rather snuf and I need Some force to open it
