Roborock S8 Pro Ultra S-Bag tower

For easier use of S-bags on the Roborock S8 Pro Ultra base station. Adapter made previously worked just fine, untill bag got overly full and made a blockage through the adapter plate.

This version replaces original bag holder tower from the base station with one that accepts S-bags directly and no more issues removing the bag when it's full.

This is V1, still in testing.

No permanent modifications required to the base station. Accepts S-bags without modification.

• Print all 3 pieces. 
• Use 2 M4x20 screws and nuts to attach lock to the tower.
• Remove old tower from the base station by unscrewing 3 screws.
• Install new tower using original screws.
• Install S-bag by sliding bottom in and press sides against the tower.
• Slide the lock in place.

Coffee?
https://ko-fi.com/jorihelin

(I take no responsibility if you break your base station or any other issues that could arise from using the model. Print and use with your own risk.)