HSW Magnet insert 10x5mm
This is for hanging the HSW on a magnetic surface, in my case my Bambulab printer.
14
116
0
409
updated November 10, 2023
Description
PDFInsert to combine with a magnet (10x5mm 2,5kg force) for hanging the HSW to a magnetic surface. In my case on the side of my Bambulab printer.
2-3 of these with 2,5kg magnets per HSW panel should hold it, depending on the magnetic properties of the surface.
The magnets are glued in place.
Print profile as the original:
0.20mm, 4 perimeters, 20% infill.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Changed the hollow insert to fit a 10x5mm magnet on he underside.
