CPS SP2 Stock Remix

Printing recommendations as per the original model however I chose to go with a 50 percent infill printed in PETG.

I've removed a large number of the bonded sections leaving only two parts that need gluing together. These will all fit on a 220mm square print bed.

I've included a bolt on rail and a few other aesthetic tweaks. 

Thankfully I had an excellent base model to work from. Thanks Lupo Solitari

You will need some additional hardware as well as what is in the original model:

4x M3 x 8mm Button Head Allen Bolts 

2x M4 x 16mm Allen Cap Head Screws

2x M4 nuts and washers

I've removed a large number of the bonded sections leaving only two parts that need gluing together. These will all fit on a 220mm square print bed.

I've included a bolt on rail and a few other aesthetic tweaks. 

Thankfully I had an excellent base model to work from. Thanks Lupo Solitari