Multi Color Coral Snake

I needed a coral snake for underwater reef display. Created this one that fits together very well and is posable. 

Printed with PETG, on the MK4, 0.4 nozzle and .2 layer height. Print as pieces to create the length of snake desired. Only the head requires gluing. 

With the FW release of 5.1.0 alpha and PS 7.0 Alpha1 can print multiple pieces at once and cancel individual items if there is a problem. I used overlapping brims to help keep in place (8-10) and glue on satin sheet. Go to Print settings>Output> and I choose firmware option. Notice where the individuals are placed on the bed (or can cancel currently printing.) Four at a time was a good compromise for me. 

NOTE: You can arrange items on bed in chronological order to make easier.

I added eyes from fisheyes card to add realism.

The snake has knurled skin, even the head and tail.