Medusa | 1 or 4 parts

Medusa, once a ravishing beauty cursed by Athena to become a Gorgon with serpents for hair, whose mere gaze could turn onlookers to stone, remains one of Greek mythology's most enduring and enigmatic figures, symbolizing both the perils of vanity and the ferocity of female rage.

Part of the ongoing tribute to Greek Mythology

Designed to print a single or 4 parts.

I am sure there are other solutions but in case you want to join and wall mount the 4 parts, feel free to use Wall Mount for Filament Paintings

Use the same layer changes for either the one or the 4 parts and print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA BambuLab Basic Gray
• PLA Overture Light Gray
• PLA+ Esun Bone White
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #7 (0.64mm) swap to Charcoal Black
• At layer #10 (0.88mm) swap to Cement Gray
• At layer #12 (1.04mm) swap to Sunlu Gray
• At layer #14 (1.2mm) swap to BambuLab Gray
• At layer #18 (1.52mm) swap to Light Gray
• At layer #22 (1.84mm) swap to Bone White
• At layer #32 (2.64mm) swap to White for the rest.