Logitech C270 Webcam holder and arm for Prusa MK4 Z-Axis (X-End-Clip)

A simple Webcam holder with a arm for a Logitech C270 Webcam which replaces the X-End-Clip. You can extend the arm by printing just more arm parts. I suggest to use five arm parts and print any parts from Prusament PETG. You can choose between a “Top-Version” and “Bottom-Version”. The only difference is, where the camera mounting is on the bearing clip. On the picture you can see the “Top-Version".

Print instructions

Printed Parts 

• 1x Improved Logitech C270 Manual Focus System
• 1x X-End-Clip with Mount - top or bottom version (use PETG!)
• 1x Arm_A (for Webcam)
• 5x Arm_B (recommended)

Additional Parts 

• min. 5x M3x16 Cap Head Screws (for arms)
• min. 6x M3 Nuts (for arms and webcam adapter)
• 1x M3x20 Button Head Screw

Assembly

• Replace right X-End-Clip
• Attach as many arms as you printed
• Remove foot from Webcam
• Screw on Webcam
• Enjoy

Links
The links to shops can be advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.