Case for ESP32-2432S208 Sunton Touch Display - USB-C
Case for ES32-2432S208 Sunton Touch Display - for boards with Micro-USB AND USB-C.
7
116
0
642
updated November 9, 2023
Description
PDFThe display fits nice and can be screwed in with M3x6 screws. The base is a press fit and has 2 mounting holes.
The base has to be rotated 90 degrees for printing.
No supports needed.
This model is for boards with both Micro-USB and USB-C.
If you have a board with only micro-usb see this model: https://www.printables.com/model/599580-case-for-esp32-2432s208-sunton-touch-display-micro
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
This model has higher sides to fit an additional screw down base.
This model is for boards with both Micro-USB and USB-C.
If you have a board with only micro-usb see this model: https://www.printables.com/model/599580-case-for-esp32-2432s208-sunton-touch-display-micro
