Parametric Spacer Pads for the Under Desk Drawer

I printed the brilliant large drawers by @labemolon_235858 and mounted them under the Lack table in our living room. Of course, I was sloppy when mounting and the damn rails were just a bit too far from each other, so the drawer easily fell out. Bummer.

My wife was strongly opposed to additional attempts to mount those things properly - she has the very reasonable fear that the cheapo table might lose integrity if you make too many holes. So I came up with the idea of simply printing some thin pieces of plastic that can be glued to the lips of the drawer, thus increasing its width.

This model is parametric as there is no CAD file whatsoever, only a scaled primitive in PrusaSlicer. My only contribution was measuring the part of the drawer this needs to fit - I then just created a box in the slicer and gave it the right dimensions. You can easily adjust this to your situation by simply changing the Z height of the object in the slicer:

You can attach these using superglue or double-sided tape, whatever you have lying around.

It's not really a remix, more of an add-on - but I wanted it to appear in the model's remixes so others can easily find it.