Stackable Amiibo / Figure Display Shelf

This is a stackable shelf I made for putting my Amiibos in a vertical tower to save space instead of a tiered staircase.

The shelf height is 100mm from base of one level to bottom of the other.

• The connectors in the legs have a 0.25mm fit tolerance in although to achieve a tight push fit.
• Place the NARROW side of the leg where the connector peg is flush with on the print bed for maximum shape accuracy.
• If the connectors end up too big… that's why you need a file with 3d printing! 🤣
• Remember to set a decent amount of infill (15%, cubic) and top layers (I used 4) for a good finish on the plate.