CO2 Detector

We build a simple CO2 detector that measures the CO2 content of the air and gives signals as soon as certain values are exceeded. 

Assembly manual

You can see the instruction how to build this on our wiki:

 https://wiki.swablab.de/de/Projekte/CO2Melder

Feel free to contact us, if there are any questions.

Print instructions

Supports are not necessary.
Layer Height: 0,15mm
Print with at least 2 perimeters, about 15% infill.

You can use standart 0,15 Speed profile from Prusa Slicer.