Magnetic Car Phone Holder

To be printed in flexible TPU.

Probably the most useful thing I ever printed. It snaps like a charm, both on the phone (because it is flexible) and in the car (because of magnets). But many cars have plastic at that place. Don't worry, just buy a VW car :) Yes, sorry for that, it will only work in you car if it has magnetic material there. Test it with a magnet first.

An 8mm round or cube magnet fits in. You can use up to four magnets (per one ‘dbl’ part) but in fact two are quite enough (and one of them can be smaller height). Just fit in whatever you find in your shelve. An 8mm stack of small magnets would work, too.

I use two ‘dbl’ holders but the ‘single’ version might be enough. You can try it to save printing time.

If your phone does not have the same size as mine (see photo), scale the stl file in that one dimension.