Parametric Flat Top Lego Compatible Base

I see two ways to use this model. Use parameters to change the size you want in Fusion 360 and then:

1. Print it out and glue it onto another model
2. Add it as a component to an existing fusion 360 model

For print settings, I recommend following https://blog.prusaprinters.org/how-to-make-3d-printed-lego-and-lego-duplo-parts_31741/. I was able to print in PLA with no problem. It works best if you have a brim and adjust your “elephant foot” setting. The blog recommends 0.4mm elephant foot. I used 0.35mm with success.