With the original fan duct i had issues... i swapped it to a better one, and it worked. Great design! (edited)
Ender 3 V3 SE Lightweight Fan Shroud
Fan relocation shroud that uses stock 4010 fan. Better airflow and reduced weight.
858
9557
123
30 k
updated
November 7, 2023
Makes
Comments
Need supports even at low speeds. Anyway it works even if not aestetically perfect
Perfect piece, 30 minute print and worked straight out of the box
@Mrstaggerlee_4785575 is that the upgraded 300c hotend/nozzle I see? if not then sorry but i couldn't help noticing it looks a bit longer than the stock one
@vaqucle_4270450 what’s that stepper moter cover and hot end fan cover?
@CheezPizza one of them is this one- https://www.printables.com/make/3312129
but for the other you might want to check his makes. good luck!
Honestly, its great! I have been having way less overhang issues. Printed it in PLA, which isn't the best choice for this but it works! Even though the printer now has way more exposed electronics I like it that way! Amazing model definitely recommend it! Thank you!
looks good, works good, the duct can be difficult to attach if printed at 0.2 or the same settings as the shroud
