Use stock 4010 fan and bolts.
Both the fan shroud and the air duct can be printed in PLA.
Two versions available, with honeycomb or horizontal grill intake.
Print settings:
Nozzle diameter:
0.4 mm
Layer height:
0.1-0.2 mm
Infill density:
10%
Perimeter count:
3 perimeter, 3 top/bottom
Supports:
None (May be required if high print speed)
Material:
PLA
Tags
The author remixed this model.
Differences of the remix compared to the original
- Added custom pattern on the intake
- Added opening to adjust extruder tension
- Angle revised for better air duct aim
- Revised bolt hole clearance
- Few dimensions adjusted