Reloading Powder Pan with Handle

This powder pan was designed to work with an AMIR/Brifit digital scale from Amazon. (Linked below) However, there are many other brands of scales that look identical or use the same platten. The bottom measures 33mm in diameter and is chamfered so you can check your scale with your calipers to see if it will fit well. Height is 25mm.

Print in orientation in STL. I use auto supports. Print shown in black is Polymaker PolyLite PLA Pro.

https://www.amazon.com/dp/B083XVY76M/?coliid=I2XRJJAFJ2STM1&colid=2D75L34HGASYR&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it