Anycubic i3 Mega Waveshare 3.5inch 480x800 LCD Mount

A mount to put in the Waveshare 3.5inch 480x800 LCD.
It is this one: https://www.waveshare.com/3.5inch-480x800-lcd.htm

You will need to modify the existing cutout for the display!
It is a little bit to narrow unfortunately.
I just opened mine to the left a bit.

As it is hdmi, you will need another motherboard with a hdmi port, I am using a manta e3ez from btt.
I would also recommend one of those flat hdmi cable module things, as it makes the routing inside easier!

Put the screen in to the frame, screw in from behind and then just glue the hole assembly in place.
It is a tight fit by design, be careful.