Wall-mounted Holders for Universal Key Cover

A collection of wall-mounted holders for my previously published Universal Key Cover (https://www.printables.com/model/613681-universal-key-cover).  Includes holders for 1, 2, 3, or 4 keys.  These holders use inserts to allow color-coding to match your key covers or to provide a color that complements the holder.  All holders can be secured to a wall with one of the provided mounts or you can use magnets to attach to any magnetic surface!

If you're looking for a desktop holder, check out my recently published Desktop Holders for Universal Key Cover ( https://www.printables.com/model/652818-desktop-holders-for-universal-key-cover) - which includes holders for 1, 2, 3, or 4 keys as well as a tray for storing small objects.

Print any HOLDER and slide it onto a MOUNT that you screw onto a wall OR attach two 12mm x 3mm neodymium magnets with superglue for use on any magnetic surface.

The provided STL files are intended to be printed in PLA (though PETG should also work fine) and do not require supports.

PrusaSlicer 3MF files are provided for generic PLA, and G-code files are provided for the Original Prusa MK4.

The HOLDERS for Universal Key Cover keys seen in the photos were printed on an Original Prusa MK4 in Overture White PLA with a 0.4mm nozzle at 0.2mm QUALITY layer height with a 5% Gyroid infill.

The holder INSERTS for Universal Key Cover keys seen in the photos were printed on an Original Prusa MK4 in various generic PLA brands and colors (some of it is silk PLA) with a 0.4mm nozzle at 0.2mm QUALITY layer height with a 100% Rectilinear infill and a Concentric bottom fill pattern.

The holder MOUNTS for Universal Key Cover keys seen in the photos were printed on an Original Prusa MK4 in Overture White PLA with a 0.4mm nozzle at 0.2mm QUALITY layer height with a 100% Rectilinear infill.