Prusa Mini | Anti-Vibration Feet Shims + Dampener Remix

Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór.

This is the most effective upgrade I have made for my printer. Absolutely brilliant model.

The printer wobbled after installing these dampening feet, so I modeled shims to fit the dampeners for leveling out the printer. Additionally, the Z-axis dampener sat too tall, raising the back end of the printer several millimeters. If you have the same problem, this shorter dampener will resolve your issues.

(Original model does offer various “sizes," but not in the height of the dampener, itself. Refer to second image)

I've also added a revised dampener shape for the right rear foot to accommodate fitment around the LCD ribbon cable and electronics box. Refer to third image.

Shim sizes are 0.2mm, 0.4mm, 0.8mm, and 1.6mm. The G-code includes one shim in each size. Stack them as needed.

TPU or PETG recommended

I suggest adding a strip of electrical tape to the bottom of every dampener for grip. Or you can try Alexander's recent remix, which accommodates the addition of rubber feet. In my experience, the electrical tape is more than adequate, though. Plus, you won't be having to raise the printer another 5mm.