Gridfinity Dashboard for Logitech Flight Instrument Panel

Gridfinity Dashboard for Logitech Flight Instrument Panel

Requires interface plates and magnets to connect to a Gridfinity base plate.

Requires 3 x dowels, printed straight up, with a brim.

Print bracket on the side.

No support material needed.

You need two brackets, one of them mirrored in the y-axis in the slicer.

You need 4 x m3 x 25 countersunk hex bolts and 4 m3 nuts

I used adaptive cubic infill pattern.

I used PLA with a 0.2mm layer height and with a 0.4mm nozzle.

Included is the f3d file

2023-11-04 update v2