RC car GECKO test part

The most complex part for printing a GECKO car. If you print this part, you probably won't have a problem printing the whole car. Before purchasing a full-fledged model, test whether your printing experience is sufficient.

See if you can easily remove supports from the model.

A calibration component to test if your printer is well set up and you can print the entire model correctly. Try inserting a 10x15x4mm bearing into the printed part. The bearing must not be loose and must fit at the same time.

GECKO will amaze all lovers of crawlers and expedition cars. The detailed design of this car legend provides an unforgettable driving experience along with the suspension system combined with precise steering. All of this is, furthermore, enhanced by the unique feeling of the hand-built construction.

Gecko can be used indoors and outdoors. The model goes slowly, but it has a high torque, which you will undoubtedly need in the field. Thanks to these features, it can be enjoyed by children as well as adults.

This is the test part of GECKO car which is available on the official website

https://www.printfully3d.com/product/gecko

EN Step by step user guide: https://docs.google.com/presentation/d/1dInJxMR8JbT4WAQ2nmCC5T9L01qRvq_ybQPWrYpnJKM/

CZ Uživatelská příručka: https://docs.google.com/presentation/d/1wbs5QiYH1Vbw_d3C4b6p0NXMn9g46bp0j0qfl-lFl6A/

https://www.facebook.com/PrintFully3D/
https://www.facebook.com/groups/600923093810246/
https://www.instagram.com/printfully3d/
https://www.printfully3d.com/
https://www.facebook.com/FlyTime.cz/
https://www.flytime.cz/
https://www.instagram.com/flytime.cz/